FAULT
There is water on the
floor.
The lights don't
work.
If after all the above-mentioned checks the problem with your ICM remains, contact the customer
service department of your supplier and provide the following information:
•
Type of ICM
•
Serial number of the ICM
•
Brief description of the problem / observation
7. First aid
In case of accident, it is recommended:
ACCIDENT
Inhalation of refrigerant
Contact with eyes
Contact with skin
8. Disposal of the unit
For detailed information regarding the recycling of this product, please contact your local city office,
your waste disposal service or the manufacturer through its service agent. By ensuring this product is
disposed of properly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise incur by this product's inappropriate disposal.
In general, the merchandizer should be decommissioned and either refurbished or recycled if one or
more of the following are verified by an authorized service agent:
•
Corroded external or internal cabin
•
Destruction of the insulation of electrical wires or electrical components
•
Destruction of refrigeration system components.
•
Destruction of the door system
POSSIBLE REASONS
The drainage hole for the
condensate water is blocked.
There is a leakage in the tray.
The fluorescent tubes or ballast or
starter are out of order.
IMMEDIATE ACTION
Take deep breaths of clean air. If irritation persists, contact a
doctor.
Wash your eyes thoroughly with plenty of water for at least 15 minutes
and then consult a doctor.
Wash immediately with water.
HANDLING
Unblock the drainage hole.
Call a service technician.
Call a service technician.
ENG
12