Fujitsu Siemens Computers PRIMESTATION Series Manual page 90

RCA commands
Default: HOLD
Server Flash
The Server Flash command updates the RCA firmware. This command is
needed in order to make new developments available or to install a higher
release version.
The RCA firmware comprises two components that can be updated:
1. The boot image with the RCA start and self-test routines and
2. The application image that provides the actual RCA functionality.
When the Server Flash command is called, you will be asked whether a reboot
should be performed for the RCA. This ensures that the firmware is actually
updated.
Access rights:
SCON
Syntax:
SERVER FLASH BOOT|APP
tftp_address
HOSTIP=<
IMAGE=<host_filename>.img
Parameters:
BOOT
Updates the Boot Image.
APP
Updates the Application Image.
tftp_address
Specifies the IP address of the FTP server.
A Solaris system should be used as the TFTP server, for example
the PRIMESTATION.
host_filename
host_filename
Syntax: max. 8 characters, DOS notation, i. e. particularly no '.'
character
Specifies, in connection with the ending img, the name of the file
on the FTP server that contains the desired image. The image
being loaded must be stored on the TFTP server in the /tftpboot
folder.
84
PRIMESTATION as LAN Console
>
U41270-J-Z916-2-76