Fujitsu Siemens Computers PRIMESTATION Series Manual page 59

PRIMESTATION as LAN Console
User
Freely assignable user name - see "Teleservice on PRIMESTATION" on
page 103
Password
Password for this user (in plain text) - see
"Teleservice on PRIMESTATION" on page 103
It is possible when a connection is being set up to branch to the Command Line
Interface (CLI) of the RCA. For example, this allows a BREAK to be issued to
the target system. The CLI access sequence is defined as [CTRL] "]" with the
next command.
Syntax:
server cli char=^]
The same values are predefined for all ports of the RCA in this initial configu-
ration:
Speed
Word size
Parity
Stop bits
Flow control
Automatic connection setup
Syntax:
port all set baud=9600 size=8 parity=none stop=1 flow=xon
I
The line speed must be set to a speed of 19200 baud for every relevant
port when connecting RM systems to the RCA. This can be done - even
retrospectively - with the PORT command (see "Port commands" on
page 77).
The first port of the RCA must then be released for use as a console connection
- see "Port Set" on page 80.
U41270-J-Z916-2-76
9600 baud
8 bits
None
1
XON/XOFF
No
timeout=0
Configuration
53