Fujitsu Siemens Computers PRIMESTATION Series Manual page 114

Selecting validated Teleservice modems
Ê The Guard tone and Idle state modem mode items are taken from the parameter
descriptions for your modem and normally do not need to be changed.
Ê Choose the country of installation with the function CHOICES.
Ê Exit the menu by choosing SAVE.
The screen is then refreshed and the following messages are displayed
(example):
 Working ...
 Modem installation is running, please wait .................
 Approved firmware revision:
 Actual firmware revision: xxxxx
 ..................................................
 Done
 Press ENTER to continue
Ê Confirm this prompt with the <ENTER> key.
This completes installation of your modem. Now you can continue with
administration of the TELESERVICE channel.
Ê In window 2, first choose option b "Parameter for registration (OLR) and
autom. defect reporting (ADR)".
Input is required for registration, which will be prompted at this point (you
must fill in these fields including Phone/Fax).
108
Teleservice on PRIMESTATION
xxxxx







U41270-J-Z916-2-76