Fujitsu Siemens Computers PRIMESTATION Series Manual page 56

Configuration
TCP_Port_3004=
TCP_Port_3005=
TCP_Port_3006=
#
#
What has been described so far is a general overview of the configuration. What
follows is a step-by-step guide of what else has to be done.
Ê The following entries have to be made in your work file (RCA_config_file):
Keyword # Comment (Example)
----------------------------------------------------------------
RCA_MAC= # ethernet (HW) address of RCA
(08:00:06:0a:f4:0b)
RCA_IP= # ip address of RCA (129.103.165.66)
RCA_IP_Name= # host name of RCA (akkord)
The syntax of the Ethernet and IP address is checked:
Ethernet: xx:xx:xx:xx:xx:xx xx = 2-digit hex value
IP: x.x.x.x
Addressing the RCA in the network
The RCA is made accessible in the LAN by executing the mkrca script. The arp
command and the IP and MAC address recorded above as well as the RCA
system name are used here.
The mkrca script uses the work file referred to under "Template file
/opt/SMAW/SMAWxsco/misc/setup.tpl" on page 48 as a call parameter.
50
# no / yes (default no)
# no / yes (default no)
# no / yes (default no)
x = Decimal value (0 <= x <= 255)
PRIMESTATION as LAN Console
U41270-J-Z916-2-76
(0 | 1)
(0 | 1)
(0 | 1)