Fujitsu Siemens Computers PRIMESTATION Series Manual page 116

Selecting validated Teleservice modems
Ê Enter far under Telephone number if the Teleservice center does not lie in
your local telephone network. The parameter near may apply for you if you
are in the Paderborn local public network. This field is only shown in
advance if pabx was entered for "Connection between modem and telephone
network".
Ê A further parameter required is the phone number for contacting the
Teleservice center in Paderborn. A symbolic name can be used here or you
can also enter the number directly. A symbolic name is converted by the
software. If the number changes, the assignment can be changed by the
center. The following symbolic name and number apply presently for the
Teleservice center in Paderborn:
Paderborn
The operating mode of the modem is read from the modem parameters and
normally does not need to be changed.
Ê Save the settings with SAVE.
Your system will now try to establish a connection to the defined
Teleservice center. The following screen appears during this. The text on
this screen is variable so the data shown below is just a snapshot.
When the connection has been established, the Teleservice center in
Paderborn requests you to enter the required information.
110
Teleservice on PRIMESTATION
0049+D-5 00495251829890
U41270-J-Z916-2-76