Reinstalling The Software - Siemens SIMATIC Series Getting Started

6.3

Reinstalling the software

General installation procedure
In case of errors in your software installation, you can reinstall your software using the
Recovery CD or DVD, the Documentation and Drivers CD or the Restore DVD.
● Recovery CD or DVD: The recovery CD/DVD contains the Windows user interface with
● Documentation and Drivers CD: Contains the documentation and the hardware drivers.
● Restore DVD: Contains a hard disk image file with the original software (operating system
Restoring the factory condition
● Place the Restore DVD into the drive and restart the device.
● Press the ESC button when the BIOS message "Press <F2> to enter Setup" appears.
● Select the optical drive using the cursor keys.
● Now follow the instructions on the screen.
For information on the functions, refer to the README.TXT file on the Restore DVD.
SIMATIC IPC847C
Getting Started, 12/2010, A5E02669190-02
tools for configuring the hard drives, and for installation of the operating system and the
languages supported by the operating system (MUI).
The base language of the operating system to be installed is English. If you want to
integrate additional languages, you will need to subsequently install them from Recovery
CD 2 or DVD.
with installed hardware drivers).
After initialization, a "Boot Menu" is displayed.
CAUTION
All existing data, programs, user settings, authorizations and license keys on the drives
will be deleted and are thereby lost.
Commissioning
6.3 Reinstalling the software
33