Basic Commissioning - Initial Startup; Reinstalling The Software; General Installation Procedure - Siemens SIMATIC IPC627C Getting Started

Commissioning

6.2 Basic commissioning - initial startup

6.2 Basic commissioning - initial startup
The PC operating system is automatically set up the first time you switch on the device.
Procedure:
1. Set the ON / Off switch to I position (On). The PC performs a POST. During the self-test,
2. Wait until this message is cleared, then follow the instructions on the screen.
3. Type in the Product Key as required. You find this key on the "Certificate of
4. Automatic restart
After you have entered all necessary information and after the operating system
setup is completed, the PC is automatically restarted and displays the user interface of the
relevant operating system.
When you switch on the PC now, the user interface of the operating system or logon dialog
of the operating system (with Windows Embedded Standard 2009) is automatically opened
when the startup routine is completed.
6.3

Reinstalling the software

6.3.1

General installation procedure

If your software gets corrupted, you can reinstall your software using the Recovery CD, the
Documentation and Drivers CD and the Restore DVD.
Recovery CD:
Contains the tools for setting up hard disk drives and the operating system.
Documentation and Drivers CD:
Contains the documentation and the hardware drivers.
Restore DVD:
Contains a hard disk image file with the original factory software (operating system with
installed hardware drivers).
38
this message appears:
Press <F2> go to SETUP Utility
Press <F12> go to Bootmanager
Authentication", in the "Product Key" line.
NOTICE
The PC may not be switched off when you run setup.
Do not change the default BIOS settings, otherwise the operating system setup may
become corrupted.
SIMATIC IPC627C
Getting Started, 09/2011, A5E02669077-03