Siemens SIMATIC Series Getting Started page 18

Application planning
3.2 Unpacking and checking the delivery unit
Noting down the device identification data
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the following data in the table below:
● Serial number: The serial number (S VP) is located on the rating plate either on the rear
● Order number of the device
● Device Ethernet address: The Ethernet address is printed on the device and is stored in
● Microsoft Windows "Product Key" on the "Certificate of Authenticity" (COA). The COA
Serial number:
Order no.
Microsoft Windows Product Key
Ethernet 1 address
Ethernet 2 address
CP 1616 onboard layer 2
Device equipment
The device equipment is listed on the inner side of the front door.
18
panel of the device or on the inside of the front door.
Figure 3-1 Rating plate
the BIOS Setup (F2 key) under "Advanced > Peripheral Configuration".
label is attached to the inside of the front door.
You may need the Product Key in case you reinstall the operating system.
Figure 3-2 COA label
S VP ...
6AGA114-1 ...
Getting Started, 12/2010, A5E02669190-02
SIMATIC IPC847C