Download Print this page

Display The Time Of Another Time Zone; Using The Chronograph - Victorinox Chrono Classic XLS MT Instructions For Use Manual

Hide thumbs Also See for Chrono Classic XLS MT:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
– Push the crown back down. The countdown function starts automatically and the
watch alarm rings when the preset time period has elapsed.
– Push the crown down to stop the alarm.
Note: The countdown function can be cancelled at any time (push in the crown for
more then 2 seconds), or a running countdown can be restarted by pushing the
crown in once.

7. DISPLAY THE TIME OF ANOTHER TIME ZONE

The watch is capable of displaying not only the local time but also the time in a
second time zone.
– Select the function Time in a second time zone (T2) (Fig. 6).
– Pull out the crown. The numerals displaying the hours and minutes for the sec-
ond time zone start to flash ( ).
To change these settings:
– Turn the crown clockwise or counter-clockwise.
– Push the crown back down.
Note:
– The display showing seconds cannot be altered ( ). This display is the same as
the one for local time.
12
English
English
– The time zone display is corrected in multiples of ½ hours ( ).
– Since the watch can operate in either 12 hour (AM-PM) mode, or in 24 hour
mode, you must bear this in mind when reading the time shown for a second time
zone.
Changing the time zone
Whenever you change time zone or whenever daylight saving changes occur
between winter and summer (and vice versa), you are able to advance or retract the
time shown by the hands for anywhere between one and several hours without
losing the display showing the minutes and seconds. To do this:
– Select and display local time (Fig. 2) and follow the instruction of 3. Setting the
time.
Note: In case of daylight saving changes, you will also have to adjust the second
time zone accordingly.

8. USING THE CHRONOGRAPH

– Select the Chronograph function CHR ( ) in ADD (Ad) mode – for addition of
time (Fig. 7) – or SPLIT (SP) mode – for intermediate times (Fig. 8).
You can only select one of these functions at one time ( ), i.e. either ADD or SPLIT,
but never both together.
– Starting and stopping the counter with consecutive pushes of the crown.
13

Hide quick links:

Advertisement

loading