Display Function; Selecting The Functions; Instructions For Use; Synchronizing The Analog Display With The Digital Display - Victorinox Chrono Classic XLS MT Instructions For Use Manual

2. DISPLAY FUNCTION

Hour hand
Minute hand
Setting crown
Indication of the selected function
Digital display
Fixed bezel with count-up scale

3. SELECTING THE FUNCTIONS

(refer to figure 1-9)
With the crown in neutral position, turn it clockwise or counter-clockwise. The
following information appears on the dial in quick succession depending on the
direction of the crown rotation, following a sequential order of 1 to 9 (turn the
crown counter-clockwise) or 9 to 1 (turn the crown clockwise).
Please refer to corresponding imagery on the fold-out page.
Fig. 1: Neutral
Fig. 3: Seconds/Date
The selected functions are identified by the alphabet symbol, which appears in the
upper section of the dial.
Fig. 5: Timer
Fig. 7: Chrono ADD Mode CHR
Fig. 9: Alarm
6
Fig. 2: Local Time H-M-S
Fig. 4: Day/Date
TM Fig. 6: Second Time Zone
Fig. 8: Chrono SPLIT Mode
AL
English English
Note: The timepiece is equipped with an end-of-life (EOL) battery indication, which
operates by causing the digital display to flash.
Countup scale ( )
When a scale is going from 5 to 60 (clockwise incrementation), you may use the
bezel as a counter, to count up to 60 minutes. To know how many minutes have
elapsed, simply note the number that the minute hand points to.
III. INSTRUCTION FOR USE
1. SYNCHRONIZING THE ANALOG DISPLAY (HANDS) WITH THE DIGITAL
DISPLAY (LCD)
After a battery change, or exceptionally in the event of a malfunction, you must
always synchronize the time indication by the hands with the time indication by the
digital numerals on the dial.
How to synchronize:
– Select the neutral function (Fig. 1) (dial with no digital figures displayed).
– Pull out the crown
time which appears on the lower display is different from the time shown by the
T2
hands.
CHR
– Turn the crown in either direction until the hands show the same time as the
numerals on the digital display
. The symbol R then appears in the upper display ( ). The
:
7