Setting Date & Time - Screw Down Crown - Victorinox SWISS AIR FORCE Manual

SETTING THE DATE & TIME - Screw Down Crown (SeaPlane, FA-18,
and Hunter watches)
A. Using the thumb and forefinger, apply mild pressure on crown while
rotating toward you until crown releases.
B. Pull out crown to position (2). Turn the crown away from you
until the date showing is the day before the desired setting.
C. Pull out the crown to the fully extended position (3) and rotate toward
you. When midnight is reached, the date will advance
to the desired date. Continue to turn the crown until the desired time
is set. Remember, the date advances at 12:00 midnight,
not 12:00 noon.
D. After setting, push in the crown then press and screw down away
from you until it is sealed tight into position (1). The date and time
are now set.
To Set Time Alone
Release crown (refer to "A') and then follow instruction "D".
- 4 -