VICTORINOX SWISS ARMY on RONDA 515.24H - GMT Watch Quick Guide

SETTING THE TIME

WATCH INDICATIONS:

1. Hours
2. Minutes
3. Seconds

If your watch is fitted with a screw-down crown, use your thumb and forefinger to unscrew it. For a normal crown, go directly to step 1.

SETTING THE TIME

SETTING THE DATE

WATCH INDICATIONS:

4. Date

5. 24-hour display

QUICK-CHANGE CORRECTION FOR DATE
The date can be corrected during the day-changing phase between 10 pm and midnight. The date of the following day must therefore be set, because no automatic date change will occur at midnight.

1. Pull the crown out to position II (watch still running).
2. Turn the crown until the required date appears (D).
3. Push the crown back into position I.
4. If you have a screw-down crown, make sure you screw the crown down correctly by exerting slight pressure on it as you turn.

QUICK-CHANGE CORRECTION FOR 24-HOUR DISPLAY

1. Pull the crown out to position II (watch still running).
2. Turn the crown anticlockwise until the desired time appears (E).
3. Push the crown back into position I.
4. If you have a screw-down crown, make sure you screw the crown down correctly by exerting slight pressure on it as you turn.