Table of Contents
Advertisement
3.3.2Addition – Expanding an existing
network by adding another
devolo Magic adapter
Before you can use the devolo Magic 2 LAN
your devolo Magic network, first you have to
connect it to your existing devolo Magic adapters
as a network. This is accomplished by using a
shared password.
1
Connect the devolo Magic 2 LAN
work connection of your computer or another
network device using a network cable.
2
Plug the devolo Magic 2 LAN
ble power socket. As soon as the LED flashes
white at regular intervals of 0.5 seconds, the
adapter is ready to operate but not yet integra-
ted into a devolo Magic network (see Chapter
2.3.1 Reading the indicator light).
3
Within 3 minutes, press the PLC/reset button
on a devolo Magic adapter in your existing
devolo Magic network for approximately 1 sec.
The new devolo Magic adapter pairs automati-
cally so no button needs to be pressed. The LED
of this adapter now also flashes white.
1-1
in
For each pairing operation, only one additional
adapter can be added at a time.
3.3.3 Changing the network password
A network password can also be changed in the
1-1
to the net-
following ways:
b
Using the web interface of the devolo Magic
adapter (see Chapter 4.2.2 Powerline)
1-1
into an availa-
or
b
Using
devolo Home Network App. For more infor-
mation, refer to the following chapter.
3.4 Installation of devolo soft-
Installing devolo Cockpit software
devolo Cockpit finds all accessible devolo Magic
adapters in your devolo Magic network, displays
information about these devices and encrypts your
devolo Magic network individually. You can use
If the LEDs light up white on both
devolo Magic adapters, the new adapter
has been successfully integrated into your
existing devolo Magic network.
devolo Cockpit
ware
devolo Magic 2 LAN
Initial use 20
or
the
1-1
Advertisement
Table of Contents
