Devolo Magic Series Manual page 31

31 Configuration
Standby
If Standby
devolo Magic 2 LAN
Standby mode if no ethernet connection has been
enabled, i.e. if no network device (e.g. computer) is
switched on and connected to the network inter-
face and if Wi-Fi is disabled.
In this mode, the devolo Magic 2 LAN
accessible over the Powerline network. As soon as
the network device (e.g. computer) connected to
the network interface is switched on again, your
adapter can also be accessed over the electrical
wiring again.
Standby
devolo Magic 2 LAN
For information on the LED behaviour of the
devolo Magic adapter in standby mode, refer to
Chapter 2.3.1 Reading the indicator light.
Firmware update
The currently installed firmware of the
devolo Magic adapter is displayed on the over-
view page (see 4.2.1 Overview).
The firmware of the devolo Magic 2 LAN
includes the software for operating the device. If
1-1
devolo Magic 2 LAN
mode is enabled,
1-1
automatically switches to
mode is enabled
1-1
factory default condition.
necessary, devolo offers new versions on the
Internet as a file download. The firmware update
the
can be initiated automatically or manually.
1-1
is not
Regularly check for firmware updates
in the
The devolo Magic 2 LAN
date firmware automatically. To do this, enable the
option Regularly check for firmware updates.
The devolo Magic 2 LAN
new firmware version becomes available and asks
if firmware should be updated.
Automatically install firmware updates
With the option Automatically install firmware
updates enabled, the devolo Magic 2 LAN
tomatically installs the firmware it has found.
1-1
1-1
can look for up-to-
1-1
lets you know when a
1-1
au-