Advertisement
Status - Inputs 1...8
In these fields, the user is able to see the status of each HDMI input e.g. if the H.264 encoder
is running or if it is in idle state, its Service name, its Service ID, video/audio PID and LCN
number.
Outputs – Modulator 1...4
In these fields, the user is able to see the status of all the RF outputs of the device such as
modulator's state, RF output frequencies and modulation settings.
System
This section provides general information of the device, like internal status of all device's
modules, CPU temperature and fan state as well as error codes for troubleshooting purposes.
4.2.2 - "Program list" page
Figure No 2
In "Program list" page (Figure No 2) the HCL-804CT provides information of all programs
that are currently being distributed via its four RF and IP outputs.
A small √ appears under the IP column indicating that the current program is being distributed
via IP too, along with the RF output.
By pressing the Excel icon at the bottom of the page, a report is generated in an Excel format
document (.xlsx).
4.2.3 - "Block diagram" page
The "Block diagram" page (Figure No 3) provides a general view of device's internal
modules and architecture.
Lemco
HCL-804CT manual v1.0
8
Advertisement
