Advertisement
4.2.11 - "System restart" page
In "System restart" section (Figure No 14) the user is able to apply a full reset to the device.
4.2.12 - "Factory default" page
In "Factory default" section (Figure No 15) the user is able to apply a factory default reset
either as DVB-T or DVB-C.
4.2.13 - "Import/Export Config" page
In "Import/Export Config" section (Figure No 16) the user is able to do the following:
1. Export: Save all the configuration is a specific file
2. Import: Upload a previously save configuration file.
Lemco
HCL-804CT manual v1.0
Figure No 14
Figure No 14
Figure No 15
18
Advertisement
