Advertisement
This unit contains high precision pieces of electronics. To ensure optimal performance
and avoid damage, do not store it in any location where it may collect dirt, duct, lint, etc.
Do not expose it to extreme heat or cold (e.g. in direct sunlight, near a heater or in the car
during the day). Place the unit in a secure place to avoid falls.
Before moving the unit, always unplug all cords first.
When installing the unit, make sure that an outlet is within easy reach. In case of
malfunction, switch the unit off and unplug the power cord. When the unit is not in use
for a long period of time, make sure that the mains cord is disconnected.
Connectivity
Before connecting the unit to other electronic devices, always switch off and unplug all
devices.
Maintenance
Do not spill liquids on the unit. Do not use any diluents or volatile liquid to clean the
unit. Instead, use a soft slightly damp cloth and allow the unit to dry completely before
using again.
Handling
Do not poke your finger into the openings on your unit.
Never put paper, metal parts or other objects into the openings of your unit. If you
suspect that there are foreign parts in your unit, switch it off and unplug the mains cord.
Contact the manufacturer's technical support department.
Do not step on or place heavy objects on top of the unit. To avoid hardware damage,
handle all buttons, connectors and switches gently.
Lemco
HCL-804CT manual v1.0
3
Advertisement
