Advertisement
1. IMPORTANT SAFETY PRECAUTIONS INFORMATION
WARNING
The following safety precautions must be observed to prevent fire or electric shock
hazard. Safety precautions include but are not restricted to the following:
Power supply / Mains cord
Operate the unit only within the voltage range defined as appropriate by the
manufacturer.
Occasionally check the power connector and remove dirt or dust that may have
accumulated.
Use only the mains cord that comes with your unit.
Do not operate the unit or plug in the mains cord if it is broken, split, or damaged in
any way.
Do not place the mains cord next to heating devices. Do not pull it, place heavy objects
on it or damage it in any way. Keep it out of reach of children.
Ensure that the device is plugged in a properly grounded socket. Insufficient grounding
may cause electrocution.
Always carefully disconnect all plugs by pulling on the plug and not on the cord. Make
sure the unit's power switch is turned off before removing the cord from an outlet.
Disconnect the mains cord when the unit is not in use for long periods of time or during
storms.
Do not connect the unit to a multiple-outlet to avoid plug overheating.
Disassembling
This unit contains parts that cannot be repaired by the user. Do not disassemble or try
to repair it as this will void all warranties. Please contact the manufacturer if you
experience any problems with your unit.
Water/humidity
Do not keep the unit in a humid place or near water.
Do not plug/unplug the unit with wet hands.
Fire
Never place a candle or another source of fire on the unit as it may fall and start a fire.
If the mains cord or the power connector is damaged or destroyed, or if there is a sudden
loss of picture during operation, or if you notice a strange smell or there is smoke,
immediately switch the unit off, disconnect the mains cord and contact the manufacturer's
technical support department.
Installation / Storage
Lemco
READ THE FOLLOWING WARNINGS
BEFORE YOU USE YOUR DEVICE
HCL-804CT manual v1.0
2
Advertisement
