Advertisement
There are eight tabs including all the 8 HDMI inputs. For each tuner the user needs to program
the following fields:
1. Input Enabled/Disabled - Enable or disable the specific HDMI input
2. Service Name – Insert the preferred service name
3. Service ID – Insert the service ID number
4. Video Bitrate – Set the video bitrate (2000-19000 Kbps)
5. Audio Bitrate – Set the audio bitrate (64,96,128,192,256,320 Kbps)
6. Audio encoding – Set the audio encoding (AAC, AC3, MPEG2)
7. HDCP – Enable/disable the HDCP function
8. LCN – Set the LCN number
9. PMT PID – Set the PMT PID
10. Video PID – Set the Video PID
11. Audio PID – Set the Audio PID
Once all settings are being written, the user must click the "Apply" button for the settings
to be saved.
Encoder status
For each HDMI input the HCL-804CT provides its current state e.g. if it is running or if it is in
idle state.
4.2.5 - "Program Selection" page
In the "Program Selection" section (Figure No 5) the user is able to select any program from
any input and assign it to any output using the "pool" technology.
Lemco
HCL-804CT manual v1.0
Figure No 5
10
Advertisement
