Starting Heater For The First Time; Control Element Description - Webasto Air Top 2000 ST Installation Manual

Air Top 2000 ST - Air Top Evo 40/55

10. Starting Heater for the First Time

- Make sure the control unit cover is fitted in position.
- Install contact guard if necessary.
- Bleed the fuel supply system carefully using Webasto Thermo Test PC Diagnosis.
- Switch on the heater via the control element (see control element operating instructions).
NOTE:
As a result of the low fuel consumption the heater must be switched on several times to fill the fuel line and
prime the system.
Conduct a trial of the heater to check all the connections for leaks and to ensure that they are secure. If the
heater suffers a fault during operation, the fault must be located and remedied.

10.1 Control Element Description

10.1.1 Rheostat
Control Element
Figure 38. Control element (Rheostat)
10.1.2 SmarTemp Control
Figure 39. Control element (SmarTemp Control)
www.webasto.us
Rotary knob for:
- Switching on and off
- Setting the room temperature
- Resetting after a fault cut-out
Indicator / Error code display
!
Changes to the settings
on the control element
are implemented after
a delay.
Starting Heater for the First Time
39 Webasto Thermo & Comfort N.A., Inc.