Pre-Start Checklist - Webasto Air Top 2000 ST Installation Manual

Air Top 2000 ST - Air Top Evo 40/55
9.

Pre-Start Checklist

This checklist is provided as a technical aid to technicians for final heater installation guidance.
HEATER MOUNTING
1 Is the heater installation safely secure / rigid?
(Ensure that all bracket bolts are tight)
2 Is there a safe clearance from heat generating
Components? (I.e. exhaust, etc...)
3 Is the heater mounted in an acceptable position
according to the limitations noted in the
installation manual?
4 Is the heater installed in a protected location?
ELETRICAL
1
Has all wiring been safely secured away from moving components
and / or heat sources?
2
Check for proper power and ground connections.
3
Check for proper fuse connection.
4
Verify the correct fuses are in the specified locations per the installation
manual.
Ensure heater and vessel fuse boxes are closed and secure. Was the
5
Webasto fuse block installed in a location protected from water and / or
moisture?
6
Ensure battery is mounted securely and connections are properly
tightened.
7
Ensure battery is at ? 12.2Vdc.
FUEL SYSTEM
1 Is the standpipe properly mounted in the fuel tank?
(sealed, structural integrity maintained).
2 Validate the standpipe does not interfere with function of sending unit by
checking fuel gauge for proper operation before completing installation
of tank.
3 Verify that all fuel lines are properly secured and are a safe distance (min.
4 in.) from exhaust systems and / or moving components.
4 Check all fuel lines for leaks or kinks.
5 Check fuel line clamps for proper positioning and tightness. Ensure fuel
system is free of leaks.
6 Ensure fuel pump is securely mounted in a cool location
NOTE: Vessel fuel tank area is generally a location with minimal sound
transfer path to vessel interior.
www.webasto.us
(Yes/No/Comments)
(Yes/No/Comments)
(Yes/No/Comments)
37 Webasto Thermo & Comfort N.A., Inc.
Pre-Start Checklist
Complete
Complete
Complete