Safety Instructions; Wiring Checklist; Installation Depth Requirement - Hayward ColorLogic 160 Owner's Manual

1.5 inch led light fixtures
Table of Contents

Advertisement

Available languages

Available languages

IMPORTANT SAFETY INSTRUCTIONS
SAFETY WARNING: Do not open. Light has no user serviceable parts inside. Improper installation
may result in death or serious injury to bathers or service personnel or others by way of electric
shock. Disconnect electrical power before installing or servicing this equipment. Read and follow all
instructions. This product to be installed by qualified personnel only.
INSTALLATION DEPTH REQUIREMENT: Except when the fixture is installed in an area of the swim-
ming pool that is not used for swimming and the lens is adequately guarded to keep any person
from contacting it, the fixture must be installed in a wall or on a floor of a pool, spa, or water feature
with the top of the lens opening not less than 4 in. and no more than 72 in. below the normal water
level of the pool.
Model
Input (Volts, Amps, Watts) Equivalent Brightness
LAC, LAW
LYC, LYW
Do not skip any steps in this or any section of the manual.
 The above safety warnings and the complete installation instructions in this manual have
been read and followed.
 A SAFETY LISTED POOL/SPA ISOLATION TRANSFORMER HAS BEEN USED TO SUPPLY
14 VOLTS TO THE FIXTURE.
 The transformer output wiring HAS NOT been tied or shorted to ground.
 The cord length has not been extended beyond the guidelines in this manual.
 The cord jacket is not damaged, cut or spliced except as noted below.
 Extensions or splices to the cord are only made in a safety listed Pool / Spa junction box
or junction box transformer system.
 The luminaire is firmly secured to the pool wall and cannot be removed without the use
of a tool.
 The luminaire has been installed by qualified personnel in compliance with the National
Electrical Code (NEC) or Canadian Electric Code (CE Code) and any applicable local
codes and/or regulations.
Installed by: ______________________ of company ____________________________
Date: __________________
LEAVE THESE INSTRUCTIONS WITH PROPERTY OWNER
1
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
14 VAC 60 Hz, 23 W
14 VAC 60 Hz, 13 W
IMPORTANT WIRING CHECKLIST
100W
60W
Lumens
1100
600

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Colorlogic 320Crystalogic 160Crystalogic 320

Table of Contents