Bonex ECOS Instructions For Use Manual page 38

BONEX-SCOOTER
Instruction for use
Fault
Switches sluggish
Housing, tube
sluggish
Eccentric lever
sluggish
Eccentric lever loose
Main switch does
not turn off
Scooter has reduced
power
Version: 2016_08
Cause of failure
>Dirt / sand on axle
>O-rings soiled
>Axle dry
>Pressure disc worn
>Pressure disc worn
>Eccentric lever worn
>Pressure disc, Eccentric lever greasy >Clean and degrease
>Temporarily malfunction of main
switch
>Battery capacity too low
>Propeller defective
>Contacts corroded
>Drive defectivet
Remedy
>Rinse with water and
>oil axle afterwards
>Clean grooves
>Clean / change O-rings
>Grease housing with silicone
>Achse mit Silikon fetten
>Replace pressure disc
>Replace pressure disc
>Replace eccentric lever
> turn a few times slowly the
switch until you hear a click
sound
> Disconnect all batteries and
repeat turning the switch
>Replace battery
>Replace propeller
>Return to manufacturer
>Return to manufacturer
Page 36