377/377 FC/378/378 FC
Calibration Manual
2. Connect the Calibrator NORMAL output LO terminal to the black COM jack
See
Figure
3.
3. Set the DUT to
4. Set the Calibrator to the desired voltage and frequency output.
5. On the DUT, verify the measurement on the display is within the readout limits for the test.
Performance Tests and Readout Limits
Table 2
lists performance tests and readout limits to verify the complete operation of the
Product and to check the accuracy of each function against the Product specifications.
8
Figure 3. iFlex Current Probe Connections
K
.
on the DUT.
Calibrator
/ +
•
0