Activating/Deactivating The Multipoint Function; Call Function - Silvercrest SFA 40 A2 Operating Instructions Manual

Activating/deactivating the multipoint function

The multipoint function is activated by default on delivery.
To disable the multipoint function:
♦ In standby mode, press the
The operating LED lights
out completely. You will hear a low beep, followed by a series
of beeps decreasing in pitch. The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device.
To enable the multipoint function:
♦ In standby mode, press the
You will hear a rising series of beeps. The hands-free set can
now be paired with several mobile phones.
NOTE
► With some mobile phones, it is possible that the hands-free set
must be restarted if several mobile phones are connected.

Call function

♦ Use your mobile phone to make a call in the usual way.
♦ To redial the last used number, press the multifunction button
♦ To activate voice dialling, press the multifunction button
once briefly.
NOTE
► Voice dialling is only available with mobile phones that support
this function. For more information on voice dialling, refer to the
instruction manual of your mobile phone.
■ 16 │ GB │ IE │ NI
up briefly orange before going
twice in quick succession.
button for approx. 3 seconds.
button for approx. 3 seconds.
SFA 40 A2