Multipoint Function; Pairing The Hands-Free Kit With An Additional Mobile; Phone - Silvercrest SBTF 10 C3 Operating Instructions Manual

Multipoint function

The multipoint function allows you to use the hands-free kit
with two mobile phones simultaneously. This is useful for
users with a private and a business mobile phone.
If you have paired several mobile phones, the hands-free
kit will now have several "known" devices available. This
status is a prerequisite for an active connection between
the hands-free kit and other mobile phones. A maximum
of 8 mobile phones can be saved as "known" devices.
The number of devices that can be actively linked to the
hands-free kit is limited to two. As soon as one or two of
the known devices come into range of the hands-free kit,
connection to the devices is made automatically. In some
cases, you must confirm the connection manually on your
mobile phone.
If a third "known" device comes into range of the hands-
free kit, the connection to this device will remain blocked
until one of the two active connections is broken or one
of the two devices leaves the transmission range. If the
connection of one of the paired devices is broken, the
link becomes free for the third (waiting) device.
If two mobile phones are connected to the hands-free
kit, the ring tone will sound from the phone itself and not
the hands-free kit when there is an incoming call to the
second mobile phone.
Pairing the hands-free kit with an
additional mobile phone
Make sure that the first mobile phone is not connected
to the hands-free kit.
Switch off the hands-free kit by pressing the multifunction
button
low beep and the LED status indicator
Press and hold the multifunction button
6 seconds. After 3 seconds, you will hear a short
high-pitched beep followed 3 seconds later by another
high-pitched beep. The LED status indicator
up permanently.
│ GB │ CY
■ 10
for about 5 seconds. You will hear a long,
goes out.
for about
lights
SBTF 10 C3