Handling And Use; Switching The Hands-Free Set On And Off - Silvercrest SFA 40 A2 Operating Instructions Manual

Hands-free system
Table of Contents

Advertisement

Available languages

Available languages

CAUTION
Only charge the battery in the hands-free set, as the cor-
responding charging electronics are built into the device.
Charge the battery only when the motor is running to pre-
serve your car battery.
Do not charge the battery while the hands-free set is attached
to the sun visor as the connecting cable may interfere with the
operation of the vehicle.
Alternatively, the battery can be charged on a PC or an exter-
nal mains adapter. You will need a connecting cable with a
suitable USB connection.

Handling and use

This section provides you with important information on handling and
using the device.
Switching the hands-free set on and off
Press the multifunction button
until you hear a high-pitched beep and the operating LED
lights up blue. The hands-free set is now in standby mode. The
operating LED now flashes blue every 6 seconds.
NOTE
If no mobile phone is paired with the hands-free set, it
switches after a short time into pairing mode.
Press the multifunction button
seconds to switch off the hands-free set. You will hear a low
beep and the operating LED lights up briefly orange before go-
ing out completely. The hands-free set is now switched off.
12 
GB │ IE │ NI
for about 3 seconds
again for about 5
SFA 40 A2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents