Activating/Deactivating The Multipoint Function; Call Function - Silvercrest SFA 40 A1 Operating Instructions Manual

Activating/deactivating the multipoint function

The multipoint function is activated by default on delivery .
To disable the multipoint function:
♦ In standby mode, press the
The operating LED lights
out completely . You will hear a low beep, followed by a series
of beeps decreasing in pitch . The hands-free set switches off
and multiple mobile phones can no longer be paired with the
device .
To enable the multipoint function:
♦ In standby mode, press the
You will hear a rising series of beeps . The hands-free set can
now be paired with several mobile phones .

Call function

♦ Use your mobile phone to make a call in the usual way .
♦ To redial the last used number, press the multifunction button
♦ To activate voice dialling, press the multifunction button
once briefly .
NOTE
► Voice dialling is only available with mobile phones that support
this function . For more information on voice dialling, refer to the
instruction manual of your mobile phone .
SFA 40 A1
twice in quick succession .
button for approx . 3 seconds .
up briefly orange before going
button for approx . 3 seconds .
GB │ MT │ 67 ■