References - Toyota PC601-00027 Owner's Manual

BLUETOOTH®
Switch between Bluetooth audio devices
While in BT AUDIO source...
1 Touch to enter "AUDIO SELECT".
2
Touch one of the number button (1 to 5) to select a
Bluetooth audio device.
The name of the Bluetooth audio device will be
displayed.
3
Touch to connect and play the selected device.

REFERENCES

Playable media and files
You can play various kinds of media and files on this unit.
Media type / standard
CD Music CD*
CD-ROM
CD-R
CD-RW
DTS CD
Video CD (VCD)
Super video CD
Photo CD
CD-EXTRA
HDCD
CCCD
Others disc DualDisc
Super audio CD
USB mass storage class device
* Incompatible with 8 cm (3 inch) discs.
• Playable disc file format: ISO 9660 Level 1/2, Joliet, Long file name
• Playable USB device file system: FAT12, FAT16, FAT32
Even when audio files comply with the standards listed above, playback may be impossible depending on the types or
conditions of media or device.
The AAC (.m4a) file in a CD encoded by iTunes cannot be played on this unit.
4
Repeat step 2 and 3 to change the Bluetooth audio
device.
• The following icons appear in front of the device
name to indicate:
" * ":
(Blank): Device is not connected or device is
If there is no registered device, "NO DEVICE"
appears.
5
Touch to exit.
Support Remark
X
• MP3 (.mp3), WMA (.wma), AAC (.aac)
X
• Multisession is supported
X
• Packet write is not supported
X
L
L
L
L
F
Only music CD session can be played.
F
Normal music CD sound quality.
L
L
F
Only CD layer can be played.
X
MP3 (.mp3), WMA (.wma), AAC (.aac), AAC (.m4a), WAV (.wav), FLAC (.flac)
Device is connected and playing (active).
connected but no operation.
ENGLISH 31