Toyota PC601-00027 Owner's Manual page 28

BLUETOOTH®
Using the voice recognition
1
Touch to enter Hands-free mode.
2
Touch / to change to [VOICE CONTROL], then
touch to select.
You can also activate the voice recognition of the
connected phone by pressing and holding
3
Speak the name of the contact you want to call or
the voice command to control the phone functions.
Note
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of
iPhone.
Answering a phone call
When there is an incoming call, the unit will rings.
Receiving a call
Touch (or press on the remote control) to answer
the first incoming call.
While talking on the first incoming call, you can answer
another incoming call by touching
the remote control).
• The first incoming call will be put on-hold.
Operation during phone call
Adjusting the phone volume
Touch + / – (or press
control) during a call to adjust the phone volume ([00]
to [35]).
• Touching and holding + (or pressing and holding
on the remote control) continuously increase
the volume to [25].
• This adjustment will not affect the volume of the other
sources.
• By default, volume [15] is selected.
Ending or rejecting a call
Touch (or press on the remote control) to end
the current call or reject an incoming call.
• While talking on the first incoming call, you can reject
another incoming call by touching
on the remote control).
• Touching (or pressing
while having two active calls will end the current call
and activate the held call.
Switching between hands-free mode and
private talk mode
Touch 6 during a call to switch between hands-free
mode and private talk mode.
Note
• Operations may vary according to the connected Bluetooth device.
28 ENGLISH
.
(or pressing on
/ on the remote
(or pressing
on the remote control)
Switching between active calls
Touch (or press on the remote control) to swap
between current call and held call.
Adjusting the sensitivity of the microphone
1
Touch to enter [FUNCTION].
2
Touch / to change to [MIC GAIN], then touch
to select.
3
Touch / to adjust the sensitivity level of the
microphone ([LEVEL –10] to [LEVEL +10]).
The sensitivity of the microphone increases as the
number increased.
4
Touch to select the level.
5
Touch to exit.
To return to the previous setting item, touch
Adjusting the noise reduction level
1 Touch to enter [FUNCTION].
2
Touch / to change to [NR LEVEL], then touch
to select.
3
Touch / to adjust the noise reduction level
([LEVEL –5] to [LEVEL +5]).
Adjust the noise reduction level until the least noise is
being heard during a phone conversation.
4
Touch to select the level.
5 Touch to exit.
To return to the previous setting item, touch
Adjusting the echo level
1
Touch to enter [FUNCTION].
2
Touch / to change to [ECHO CANCEL], then
touch to select.
3
Touch / to adjust the echo cancellation
delay time ([LEVEL –5] to [LEVEL +5]).
Adjust the echo cancellation delay time until the least
echo is being heard during a phone conversation.
4
Touch to select the level.
5
Touch to exit.
To return to the previous setting item, touch
.
.
.