Toyota PC601-00027 Owner's Manual page 16

BASIC SETTINGS
Adjust the rear and front speaker output
balance
1
Touch to enter [FUNCTION].
• For 2Din CD Basic Audio, touching AUD enters
[AUDIO CONTROL] menu directly.
2
Touch / or
[AUDIO CONTROL], then touch
3 Touch / or
[FADER SETTING], then touch
4
Touch / or
setting, then touch
[POS R15] to [POS F15] (default: [POS 0])
5
Touch to exit.
To return to the previous setting item, touch
Adjust the left and right speaker output balance
1
Touch to enter [FUNCTION].
• For 2Din CD Basic Audio, touching AUD enters
[AUDIO CONTROL] menu directly.
2
Touch / or
[AUDIO CONTROL], then touch
3
Touch / or
[BALANCE SETTING], then touch
4
Touch / or
setting, then touch
[POS L15] to [POS R15] (default: [POS 0])
5
Touch to exit.
To return to the previous setting item, touch
Adjust the sound effect settings
1
Touch to enter [FUNCTION].
• For 2Din CD Basic Audio, touching AUD enters
[AUDIO CONTROL] menu directly.
2
Touch / or
[AUDIO CONTROL], then touch
3
Touch / or
[SOUND EFFECT], then touch
4
Touch / or
[K2 TECHNOLOGY], then touch
5
Touch / or
or [OFF].
[ON] (default): Creates realistic sound by compensating
the high-frequency components and restoring the
rise-time of the waveform that are lost in audio data
compression.
[OFF]: Cancels.
• Not applicable for RADIO source and AUX source.
6
Touch to confirm.
7
Touch / or
[SPACE ENHANCEMENT], then touch
8
Touch / or
of the following selection.
[SMALL] / [MEDIUM] / [LARGE]: Virtually enhances the
sound space.
[OFF] (default): Cancels.
• Not applicable for RADIO source.
9
Touch to confirm.
16 ENGLISH
/ to select
.
/ to select
.
/ to adjust the
to confirm.
.
/ to select
.
/ to select
.
/ to adjust the
to confirm.
.
/ to select
.
/ to select
.
/ to select
.
/ to select [ON]
/ to select
.
/ to make one
10
Touch / or
[SOUND LIFT], then touch
11
Touch / or
of the following selection.
[LOW] / [MIDDLE] / [HIGH]: Virtually adjust the sound
position heard from the speakers.
[OFF] (default): Cancels.
12
Touch to confirm.
13
Touch / or
[AUTO SOUND LEVEL], then touch
14
Touch / or
or [OFF].
[ON] (default): Boosts the frequency to reduce the
noise heard from outside the car or running noise of
the tyres.
[OFF]: Cancels.
15
Touch to confirm.
16 Touch to exit.
To return to the previous setting item, touch
Adjust the equalizer manually
Before making an adjustment, select the source you want
to adjust.
1 Touch to enter [FUNCTION].
• For 2Din CD Basic Audio, touching AUD enters
[AUDIO CONTROL] menu directly.
2 Touch / or
[AUDIO CONTROL], then touch
3
Touch / or
[PRO MODE], then touch
4
Touch / or
[MANUAL EQ], then touch
• The sound elements (frequency level, tone level, Q
factor) are preset into each selection.
5 Touch / or
frequency you want to adjust, then touch
[62.5HZ] / [100HZ] / [160HZ] / [250HZ] / [400HZ] / [630HZ] /
[1KHZ] / [1.6KHZ] / [2.5KHZ] / [4KHZ] / [6.3KHZ] / [10KHZ] /
[16KHZ]
6
Touch / or
level to memorize for each source, then touch
confirm.
[LEVEL -9] to [LEVEL +9], (default: [LEVEL 0])
7
Touch / or
[Q FACTOR SETTING] to adjust the quality factor, then
touch to confirm.
[1.35] / [1.50] (default) / [2.00]
8
Touch to exit.
To return to the previous setting item, touch
/ to select
.
/ to make one
/ to select
.
/ to select [ON]
.
/ to select
.
/ to select
.
/ to select
.
/ to select a
.
/ to adjust the
/ to select
.
to