Vega VEGAMET 308 Technical Information & Operating Instructions page 6

Indicating and operating elements
Multipoint
connector
Indicating meter
Potentiometer for
empty adjustment
Switch for
current output
Potentiometer for
full adjustment
Mains control lamp
Start-up
• Adjust the requested current output range
0 ... 20 mA or 4 ... 20 mA.
• Feed supply voltage, should comply with the
voltage stated on the connection diagram.
6
60
40
20
0
%
0 4 A B
mA
VEGAMET 308
• Carry out adjustment and switch point adjustment
(VEGAMET 308) acc. to the following description.
80
100
Key for indication and
adjustment of the max.
switch point
Potentiometer for
adjustment of the
max. switch point
Potentiometer for
adjustment of the
min. switch point
Key for indication and
adjustment to the min.
switch point
A / B switch
Relay control lamp
VEGAMET 307 / 308
only VEGAMET 308