Table of Contents
Advertisement
LinkRunner G2 Tests and Results
Cable Test
The Cable test can help you determine cable
length and status, wire map patch and structured
cabling, and locate cables. The Cable test tab can
perform tests using the configurations described
in this section.
With an unterminated cable test, you can determ-
ine length, shorts, and splits and locate opens.
With a terminated cable test using the internal
Wire Mapping Port or a WireView accessory, you
can identify cable length, shorts and opens, split
pairs, crossover cables, and normal or negative
pair polarity.
NOTE: LR G2 cannot perform a cable test on a
cable that is connected to a switch.
To restart testing at any time, tap the refresh icon
at the top right of the LR G2 app screen.
Refer to
Buttons and Ports
as needed.
66
- Quick Links:
- Switch Test
- Cable Test
Hide quick links:
Advertisement
Table of Contents
