netAlly LINKRUNNER G2 User Manual page 41

Address: When AutoTest runs, the LinkRunner
G2 attempts to reach the target address entered in
this field. The default is Google.com.
Touch the Address field to open a pop-up
l
keyboard and enter a new address.
Touch the action overflow icon
l
of the Address field to either Delete the
target address field from AutoTest or
Duplicate the current target address entry.
Port: This is the port the LinkRunner G2 uses to
connect to the target address for a TCP Port Open
test. The default is 80. Touch the Port field to open
a pop-up number pad and enter a new port
number. Touch OK to save it.
Ping: Slide the toggle switch right to run an ICMP
Ping test to the target address. The Port field dis-
appears when this toggle is enabled.
+ ADD TARGET: Touch to add additional target
address fields.
Test
Stop After: This setting directs AutoTest to stop
testing after the selected test step. The excluded
test cards will not appear on the AutoTest screen.
LinkRunner G2 Application Settings
41
to the right