netAlly LINKRUNNER G2 User Manual page 70

Using the Tone Function
You can also trace a cable using a Fluke Networks*
IntelliTone™ Probe, or any analog probe, and the
Tone function.
Connect a cable into the
top RJ-45 port, touch the
FAB, and select the
appropriate Tone
option for your probe.
The LinkRunner G2
emits the tone through
the cable, and the probe
detects it, allowing you
to trace the wire or locate it in the switch closet.
* IntelliTone is a trademark of Fluke Networks.
LinkRunner G2 Tests and Results
70