netAlly LINKRUNNER G2 User Manual page 88

5. Touch the NEXT button at the bottom left of
the screen.
6. Touch DONE.
7. The SD card storage location is now
available from the
application, and a notification appears in the
Top Notification Panel
connected.
Using a USB Drive
Insert a USB flash drive into the
top of the LR G2.
The USB storage location is now available from
the File Manager
appears in the
that it is connected.
Using a Micro USB to USB Cable
1. Plug a Micro USB connector side of a USB
cord into the
side of the LR G2, and plug the USB side into
a PC or tablet. (If the LR G2 folder does not
open automatically on your PC screen,
continue following the steps below.)
File Manager
application, and a notification
Top Notification Panel
Micro USB port
88
Software Management
alerting you that it is
USB port
alerting you
on the right
on the