netAlly LINKRUNNER G2 User Manual page 40

LinkRunner G2 Application Settings
IP Configuration: Touch the down caret to
switch between DHCP and Static IP configuration.
If you choose static, the IP Address, Subnet Mask,
and other IP fields display. Touch each field to
open a pop-up number pad and enter the
addresses as needed. Touch OK to save them.
DHCP Option: Slide the toggle switch right to
select Option 150, 43, or 60. Options 43 and 150
request the IP address of a key server, such as a
VoIP TFTP server or Wireless LAN Controller.
Option 60 allows the user to enter a Vendor Class
Identifier string, which informs the DHCP server of
the type of client.
Proxy: Slide the toggle switch right to enable
Proxy settings. When proxy is enabled, the
Address, Port, Username, and Password fields
appear. Touch each field to open a pop-up
keyboard and enter the appropriate data. Touch
OK to save your entries.
Targets
You can add an unlimited number of test targets
by entering the IP address or a URL and specifying
either an ICMP Ping or TCP Port Open test for
each target.
40