Moving, Rotating, And Duplicating - Bernina Bernette Series Workbook

Workbook 4—Embroidery Basics
deco 340
The deco 340 rotates designs in clockwise increments of 45º (1x = 45º,
2x = 90º, 3x = 135º....); also rotates designs clockwise &
counterclockwise, in 1º increments. Onscreen duplication is not
available on this model.
 Select indicated motif; select Editing tab.
 Use positioning arrows or touch screen to move the motif up and to the right.
 Select Pattern selection tab; select motif again.
 Touch Rotate 45º. Move design to right.
 Select Pattern selection tab; select motif again.
 Touch Rotate 45º two times. Move design to left and down.
 Hold the rotate key for more than one second, then use the plus and minus
keys to adjust the flowers as desired.
bernette Chicago 7
The bernette Chicago model rotates designs in clockwise increments
of 90º (1x = 90º, 2x = 180º...). Onscreen duplication and combining of
designs is not available on this model.
 Select indicated motif.
To move the motif, press the OK  button first. Then, use the

positioning arrows on the front of the machine to move the motif
down approximately 10 mm. Note: Pressing an arrow key will move the motif
~.2mm, press and hold the positioning arrow button to move the motif in 5
mm increments.

Push the rotation button on the front of the machine 3 times to rotate the
design 270º.
052815
Move, Rotate, Duplicate
64 - Floral Border
63 - Floral Border
24