Bernina Bernette Series Workbook page 36

Workbook 4—Embroidery Basics
BERNINA 560, 750 QE, 770 QE
Enter single letters or words and use the Rescale
Motif Proportionally tool to change the size of the
lettering object.
 In the Embroidery Selection Menu, select Open New Motif,
select Alphabets folder: select folder #4 Drifter fonts.

Enter BERNINA; touch Green Check to confirm.
 Select Hoop icon and select Oval Hoop, touch Back arrow.
 Select "i"; select Rescale using the Stitch Width knob to
make changes to size; Rescale to 90%.
 Select the Embroidery Menu (needle icon); stitch word
(optional).
 Continue changing the size of the word and stitching until
3 text lines have been stitched.
BERNINA 780, 880
Enter single letters or words and use the Rescale Motif
Proportionally and the Rescale Motif Width and Height
to change the size of the lettering object.
 In the Embroidery Selection Menu, select Open New
Motif, select Alphabets folder: select folder #1 Drifter font.
 Enter BERNINA; touch Green Check to confirm.

Select Hoop icon and select Oval Hoop; close screen.
 Touch "i"; select Duplicate 2x to create 3 words total.
 Move the text on screen by selecting on the touch screen
or selecting the layers to the right of the hoop on screen.
Arrange the text as shown.

Select "i"; select the top word and select Rescale Motif
Proportionally.
 Adjust Stitch Width knob and size of lettering to 90%.
 Select the second layer (or second text line) and the
Rescale Motif Width and Height.

Adjust Stitch Length knob to change lettering height to
70%.
 Select the third layer (or third text line) and the Rescale
Motif Width and Height.
 Adjust the Stitch Width knob to change the lettering width
to 70%.
 Select Close Box.
 Select the Embroidery Menu (needle icon); stitch words
052815
Changing Lettering Height
36