Bernina Bernette Series Workbook page 28

Workbook 4—Embroidery Basics
B 580
 Select indicated motif.

Select Hoop icon and select Oval hoop, touch Back arrow.
 Touch "i" to Edit.

Select Rescale > rescale to 90 % > select Back arrow.
 Select Duplicate icon > there are now two motifs on screen.

Touch "i" on Layer 2 > Select Right/Left Mirror Image. The active motif is
flipped.
 Select Move function.

Select motif on screen and move so motifs are side by side.
 Use the Stitch Width and Length knobs to fine tune the position of motif.

Touch Back arrow two times, Select the Layer with both motifs (no number).
 Touch "i" > Select Duplicate .There are now four motifs on the screen.
 Touch "i" on Layer 3 > Select Up/Down Mirror Image.
 Select Move function.
 Select motif on screen and move duplicated motifs above original motifs as
shown.
 Use the Stitch Width and Length knobs to fine tune the position of motif.
 Touch Back arrow two times and Select the Layer with All motifs (no number).
 Select "i" > Select Move function> Touch Center > Touch Back arrow two
times.
 Touch Needle icon and embroider.
B 560, 750 QE, 770 QE
 Select indicated motif and rescale as desired. Move design to the left of center
(to allow room for the mirror design).
 Stitch the design.

Return to the embroidery screen and mirror image the motif.
 Move motif into the desired position.
 Use Absolute Check/Virtual Positioning to guarantee accurate placement
for the next motif and embroider.
052815
Rescale, Mirror Image
B 560: Folder 2, Design 5 (not shown)
B 750 QE: Folder 1, Design 8 (not shown)
B 770 QE: Folder 3, Design 7 (shown)
Folder 2, Design 5
28