Figure 21 - Sc1000 Hour Display; Figure 22 - Sc1000 Display Week Day; Figure 23 - Sc1000 Operation Time - Valeo SC1000 IVECO Operating Instructions Manual

BUS BODY ELECTRONICS
➔ "00:00" and "hour" appear on the screen (Fig. 22).
➔ If the start time was already programmed before, it ap-
pears instead of "00:00".
➔ The hour digits flash.
Press button to increase number of hours.
Press button to decrease number of hours.
Press button to confirm value.
➔ Minute digits flash.
Now proceed exactly as described for setting the number of
hours to set the number of minutes.
➔ Now the weekdays are displayed (Fig. 18).
Set the week day (Mo, Tu, We, Th, Sa, Su) using the
buttons.
Press button to confirm the day.
"0´"appears on the screen (Fig.24).
2.5.3.2 Laufzeit einstellen
Note
The operation time can be set in steps of 5 between
5 and 60 minutes.
Press buttons to set operating time.
Press button to confirm operating time.
2.5.3.3 Activate pre-heating mode
Press button to activate the pre-heating mode with the chosen start and operation time.
2.5.3.4 Terminate
Press button to exit the menu.
Note
If more than one preheating time is programmed, pre-
heating is done at all programmed starting times.

Figure 21 - SC1000 Hour Display

Figure 22 - SC1000 Display Week Day

Figure 23 - SC1000 Operation Time

17