BUS BODY ELECTRONICS
2.3.1.2 Heating
Rotate the knob clockwise into the red area.
2.3.2 Adjust blower speed
Note
The blower can be set from 20 to 100 in steps of
10. 20 is the smallest blower speed, on level 100
the blower runs at full speed. If the knob is turned
counterclockwise to its most left position, on the
screen displays "OFF" and the blower is switched
off.
2.3.2.1 Increase blower speed
Turn the knob (Fig.5, No.3) clockwise to 5 o'clock position.
➔ Blower speed increases incrementally by 10.
➔ The current blower speed level is shown in the display
(Fig. 9).
2.3.2.2 Reduce blower speed
Turn the knob counterclockwise to 7 o'clock position to decrease blower speed level.
➔ Blower speed decreases incrementally by 10
➔ The current blower speed level is shown in the display
(Fig. 9).
2.3.3 Adjust air flow direction /defrost function
2.3.3.1 Adjust air flow direction
Rotate knob (Fig.5, No.2) counterclockwise into 7 o'clock position
➔ air flow onto the floor
Rotate knob clockwise into 12 o'clock position
➔ air flow against the wind screen and the floor
Rotate knob clockwise into 2 o'clock position
Figure 9 - SC1000 Current Blower Speed
Level
10