Usage; Turn On; Turn Off; Driver's Workplace Functions - Valeo SC1000 IVECO Operating Instructions Manual

BUS BODY ELECTRONICS

2. Usage

2.1 Turn ON

➔ Switch on the ignition.
➔ The control panel starts automatically.
➔ The current software version (1.0) and the current re-
lease appear on the display (Fig.7).
➔ After four seconds the default screen is displayed. (Fig.8).

2.2 Turn OFF

➔ Switch off the ignition.
➔ The system powers down.

2.3 Driver's workplace functions

2.3.1 Adjust Temperature

Note
Neither the current temperature, nor the setpoint
temperature for the driver's workplace, are shown in
the display. The temperature can be adjusted in nine
steps. At level 0 (the knob is in the left-most position)
there is no regulation of temperature, at level nine
(the knob is in the right-most position) the heater
operates at maximum power.
Note
If a climate evaporator is installed in the front box, the
cooling is always on at the driver's seat whenever the
compressor is on. In order to achieve a warmer tempera-
ture, the driver must heat it up to counteract the cooling.
2.3.1.1 Cooling (if the roof-top air-conditioning unit is in cooling mode only)
Rotate the knob (Fig.5, No.4) counterclockwise into the blue area .

Figure 7 - SC1000 Release

Figure 8 - SC1000 Standard Screen

9