BUS BODY ELECTRONICS
2.4 Passenger compartment functions
Note
Air-conditioning system and heater are activated only
in the AUTO mode!
To use all modes in full, activate the AUTO mode after
turning on the control panel and make sure that the
doors are closed.
To save energy, you can switch to manual mode
(simply deactivate the AUTO mode), here the temper-
ature can be manually changed by adjusting the
blower speed.
2.4.1 AUTO mode
Note
The AUTO mode can be activated only when the en-
gine is running.
2.4.1.1 Activate
Press button (Fig.5, No.10) shortly.
➔ Mode is activated.
➔ the LED next to the button lights up, "AUTO" appears
on the display.
2.4.1.2 Terminate
Press button shortly.
➔ Mode deactivated.
➔ the LED next to the button goes out, "AUTO" disap-
pears from the display.
2.4.2 Set temperature
2.4.2.1 Adjust temperature
Press button.
➔ Temperature +1˚C.
Figure 11 - SC1000 AUTO Mode Active
12