BUS BODY ELECTRONICS
Set the week day (Mo, Tu, We, Th, Sa, Su) using the
Press button to confirm the day.
➔ The default screen appears.
2.5.2 Activate heating (without start time delay)
Press button (Fig 5. No 7.).
➔ The button's LED lights up and the heating icon ap-
pears on the screen (Fig.19).
2.5.3 Programming the timer
Note
Prior to using the timer, the correct time must be set.
The timer allows you to heat up the passenger compart-
ment without having to start the engine.
By using the timer, the starting and operating time can
be selected individually.
Up to 7 start times can be set in parallel (PRE1-7).
Press button 3 seconds.
➔ "PrE" appears on the screen (Fig.20).
Note
You have seven memory locations (PrE 1-7) available
for storing different start times. The system starts the
pre-heating mode at the respective times.
2.5.3.1 Choose start time
Press button to display the memory locations.
➔ "PrE1" appears on the display (Fig.21).
Press buttons to scroll through memory locations
PrE1-7 and select one of them.
Press button to confirm selection.
buttons.
Figure 18 - SC1000 Heating Icon
Figure 19 - SC1000 PrE
Figure 20 - SC1000 Memory location
16