BUS BODY ELECTRONICS
Press button.
➔ Temperature -1˚C.
Note
The temperature can be varied between the values
15°C and 28°C.
2.4.2.2 Display the current room or outside temperature
Press button.
➔ "INT" and the current room temperature are shown on
the display (Fig.12).
Press button again.
➔ "EXT" and the current outside temperature are shown
on the display.
2.4.2.3 Terminate
➔ Terminate the display by pressing the
timeout automatically after 3 seconds.
➔ Standard display screen appears.
2.4.3 Adjust blower speed level (HVAC version only)
Note
The blower can be set from 10 to 100 in steps of 10.
10 is the smallest blower speed, on level 100 the
blower runs at full speed. The adjustment can only be
made if the engine is running.
2.4.3.1 Activate
press button (Fig. 5, No.6).
➔ Manual blower speed level adjustment active.
➔ The LED next to the button lights up and the current blower
speed level can be read on the display (Fig.13).
➔ Blower speed can be changed.
2.4.3.2 Change blower speed level
Press button.
Figure 12 - SC1000 Current Room
Temperature
button or by
Figure 13 - SC1000 Blower Speed Level
13