Toggle Between Fresh Air / Air Recirculation (Hvac Version Only); Figure 14 - Sc1000 Air Recirculation Mode Active - Valeo SC1000 IVECO Operating Instructions Manual

BUS BODY ELECTRONICS
➔ Blower speed level is increased.
➔ The current blower speed level can be read on the dis-
play
Press button.
➔ Blower speed level is decreased .
➔ The current blower speed level can be read on the dis-
play.
2.4.3.3 Exit
By pressing the
Note
It is not possible to check the setting again. If after
leaving the mode the blower button is pressed again,
the set value is displayed, then deleted and the
blower is controlled automatically again.

2.4.4 Toggle between fresh air / air recirculation (HVAC version only)

Note
The air recirculation mode is limited to 10 minutes. After
this time the fresh air ducts are automatically regulated.
2.4.4.1 Manual operation of the fresh air flaps
Press button (Fig 5, No.5) when the automatic air
recirculation is active.
➔ The LED next to the button lights up and
lation icon (Fig.14) appears on the display.
Press the button when the manual operation of the fresh
air flaps is active.
➔ The fresh air flaps are operated automatically again.
➔ The LED next to the button lights up and
lation icon disappears from the
button or automatically after 3 seconds of inactivity.
display.
the air recircu-
Figure 14 - SC1000 Air Recirculation
Mode Active
the air recircu-
14