Appendix B. Module Specifications; Controller Module (Feature Code 8000); Control Point And Switch Module (Feature Code 6501) - IBM Nways 8265 Product Description

Appendix B. Module Specifications

Controller Module (Feature Code 8000)

Faceplate marking:
Power consumption:
Operating temperature:
Humidity:
Front panel indicators:
Front panel buttons:

Control Point and Switch Module (Feature Code 6501)

Faceplate marking:
Power consumption:
Operating temperature:
Humidity:
Connectors:
Processors:
Memory:
Special circuits:
Front panel indicators:
Front panel buttons:
© Copyright IBM Corp. 1994, 1998
This appendix describes the modules that you can use with the IBM 8265 Nways ATM
Switch.
For details on supported 8260 ATM media modules, refer to page 71.
8000-RCTL
5W at +5 Vdc
0° to 50° C (32° to 122° F)
Less than 95%, non-condensing
Power supply status, Fan status, Temperature status,
Current active controller
Switch reset, LED test
CPSW
80W at +5 Vdc
0° to 40° C (32° to 104° F)
Less than 95%, non-condensing
One RS-232 DB-9 connector for console port
•
connections
One Ethernet port for configuration, management,
•
file transfer, and debugging.
MPC860 (33MHz)
256KB static RAM
•
512KB Boot Flash EEPROM
•
4MB PCMCIA Flash EEPROM
•
16MB EDO Dynamic RAM, expandable to 32MB
128KB Nonvolatile RAM.
•
Imbedded real time clock
System Status LCD, Reset LED, CPU Stop LED.
ATM Reset, Display Control
51