Carrier Module (Feature Codes 5102); Multiprotocol Switched Services Server Module (Feature Code 5300); Video Distribution Module - IBM Nways 8265 Product Description

Carrier Module (Feature Codes 5102)

Faceplate marking:
Internal clocking:
Number of ports:
Switch interface
Port connector:
Power requirements:
Daughter cards:
Daughter card interface:
Maximum allowable power
(for daughter card):

Multiprotocol Switched Services Server Module (Feature Code 5300)

Faceplate marking:
Connectors:
Switch interface
Processor:
Power requirements:
Memory:
Special circuits:
Modem support:

Video Distribution Module

Number of ports:
Connectors:
Cable type:
Power consumption:
60
IBM 8265: Product Description
A-CMU1 (for 1-slot module)
20 MHz
2
16-bit, 20ns (256Mbps)
120-pin AMP
18.2 W at +5 Vdc
2
UTOPIA-1 (8 bits)
28.6 W at +5 Vdc
9.6 W at +12 Vdc
2.5 W at -5 Vdc
3 W at -12 Vdc
A-MSS
One RS-232 DB-9 connector for service port connection
Two Type 3 PCMCIA slots
16-bit, 20ns (256Mbps)
Power PC 603E at 100 MHz
42 W at + 5 Vdc
8KB of non-volatile RAM
•
512KB of high-speed level 2 cache memory
•
12MB of Flash EPROM
•
32MB of dynamic RAM (two 16MB SIMMs)
•
• 10MB of ATM packet memory
ATM dedicated chip sets
PCMCIA data/FAX 28.2Kbps modem
PCMIA voice/data/FAX 28.2Kbps modem
100% Hayes-compatible modem via RS-232 port
8 video, 8 audio
BNC for video, 5-pin mini-DIN for audio
RG59/U (75 ohm) for video
•
unbalanced audio cable for audio
•
62.5 W at +5 Vdc